Base Material

Kinds of Mold

Definition

Eyelet and Washer

Oval Eyelet and Washer

Kinds of Rivet and the Difference

Setting ways and Results

Setting Tool

Setting Machine

KINDS OF RIVET AND THE DIFFERENCE

HOME > Technology > Kinds Of Rivet And The Difference

1. Solid tube rivet (t/r 리벳) Made with wire, edge thickness around hole is not regular. (와이어로 만들며, 끝부분 구멍주위의 두께가 일정하지 않다.) 1-1) Figure 1-2) Eternal shapes of head Important Value - Diameter of Head(DH) Diameter of Pipe(DP) Height of Pipe(HP) 2. Cap and Rivet 2-1. Cap (캡 혹은 가시메) Barrel = leg = pipe DC = 3.8 / 5 / 6 / 7 / 8 / 9 / 10mm possible 2-2. Post Rivet for Cap (가시메 고정을 위한 하촉) a.Single post rivet (싱글리벳) Lower Part(DL x H) 5.0 x 5.0 5.0 x 5.5 6.0 x 5.5 8.5 x 8.5 8.5 x 9.5 8.5 x 10.5 9.5 x 6.5 9.5 x 8.0 9.5 x 9.0 9.5 x 10.5 b.Double post rivet (쌍리벳) Important Value : Height(H) Prepared Specification (Unit : mm) Lower Part(DL x H) Lower Part(H) Ø 7.0 6.5 7.8 8.5 3. Cap rivet (or Tube rivet) (쌍리벳) ① Having long leg(barrel) (다리가 긴 가시메) ② Use washer to assembly. (와샤를 사용하여 셋팅) Important Value : Diameter of Head (Dc) Prepared Specification (Unit: mm) DC DT H Ø 6.0 Ø 3.0 Requested Ø 6.0 Ø 3.5 Requested Ø 7.0 Ø 4.0 Requested Ø 7.2 Ø 3.7 Requested Ø 8.0 Ø 4.0 Requested 4. Post rivet for single hook (수동 후크용 리벳) DC DT H 3.8 8.5 9.5 7.0 ~ 9.0